Shower Doors in Meridian, Idaho
Framed, frameless, and a panel that matches the curb. Measure after the walls are in.
Free estimate.
- Free estimates
- Treasure Valley
- Local crew
- One number
This job covers
- Bypass sliders on a 60-inch alcove
- Pivot door with a fixed panel
- Frameless on a tiled stall
- Semi-frameless on acrylic panels
Shower Doors in Meridian, Idaho
Meridian Quality Shower Conversions handles shower doors in Meridian after the walls and the curb are in, not before. Bypass sliders on 60-inch alcoves and frameless panels on tile stalls both come through this number. Glass follows the stall.
Call (208) 274-7129 with the finished opening width. We quote after a measure on the real walls.
Shower Doors We Hang on Meridian Stalls
Glass is hardware on a stall. Bypass sliders, pivot-and-panel, frameless on tile, and semi-frameless on acrylic each change the channel and the fasteners.
Bypass sliders on a 60-inch alcove
Two panels, a header, a track. The common production choice. Toilets stay clear because nothing swings. Tracks need a level curb. We do not hang a slider on a pan that still rocks.
Pivot door with a fixed panel
A hinged door and a stationary glass. Needs swing room. Custom and Eagle baths ask for this more than a tight south Meridian hall bath. We check the toilet and the towel bar before we order.
Frameless on a tiled stall
Heavier glass, more clips, tighter tolerances. Walls have to be plumb. Out-of-plumb production board shows here. We shim within the clip range or we say the wall has to come true first.
Semi-frameless on acrylic panels
A framed header with cleaner edges. Fasteners must hit something solid behind the acrylic. We use backing, not hope. This is the kit-stall glass, not a frameless tile look.
How We Handle Shower Door Installation in Meridian
- Walls and curb are finished. Then we measure width, height, and plumb.
- We pick bypass, pivot, or frameless from the room and the wall type.
- Hardware is ordered to that measure. Holes hit studs or backing.
- Sweeps, silicone at the channel, and a spray test. Adjust until the door closes on the curb.
Materials and Methods
Doors are tempered glass and aluminum or stainless hardware. Thickness is commonly 1/4 inch on framed and 3/8 inch on frameless. Channels need a level curb. Wall clips need a solid bite. Silicone at the wall, not a bead meant to hide a 1/2-inch gap. International Plumbing Code does not size your glass, but the stall still has to keep water in. We measure twice after the walls, not off a tub flange. Hard-water film is cleaning, not a defect in the temper.
What Shower Door Installation Costs in Meridian
Angi publishes $530 to $1,400. HomeAdvisor lists $600 to $1,350. This Old House cites a sample door line near $1,600 in a walk-in composite. Three movers: framed versus frameless, opening width, and whether the walls are plumb. We quote the opening we measure.
Measuring glass after the walls, not from the old tub
The failure we see is a door ordered during demo. Tile adds thickness. Acrylic adds a different thickness. The curb is not the old apron. The opening shrinks.
We wait. Production alcoves on Ten Mile look identical until the walls are up. Then one is 58 and a quarter and the next is 59. Glass does not stretch.
Call (208) 274-7129 when the walls are in, or when you want the stall and the glass in one quote with the measure held until the end.
Hard water films both framed and frameless glass. That is cleaning. A door that will not close is a measure miss. We hold the order until the walls are true. A conversion quote can include glass as a later measure so you are not stuck with a panel that is short.
Questions
How do I get a shower door installation estimate in Meridian?
Send opening width, the city, and photos of the finished walls and the curb. If the stall is not built yet, wait to measure. We quote glass after the walls are true. A number taken off the old tub flange will miss. Name bypass, pivot, or frameless.
Should I order glass before the conversion?
No. Tile thickness, acrylic buildup, and a curb that is not level all change the opening. We measure after the walls and the pan are in. Ordering during demo is how you own a door that does not close. Hold the glass until the stall is true.
Bypass or pivot on a 60-inch alcove?
Bypass sliders keep the glass in the opening so a toilet close to the stall is safe. A pivot needs a fixed panel and a swing path. Production Meridian baths often have that toilet close. We pick hardware from the room, not from a showroom photo.
Do frameless doors leak more?
They have less channel. They need a level curb, square walls, and the right sweep. Hard water films the glass either way. Silicone at the wall channel still matters. Frameless is a look and a tolerance job, not a better drain.
Can you hang glass on acrylic walls?
Yes, if the panel is thick enough and the fasteners hit a stud or a backing plate. Thin kit walls crush. We use the hardware the surround maker allows. Drilling a soap dish to hide a hinge is not a method.
What do guides say shower doors cost?
Angi lists shower doors around $530 to $1,400. HomeAdvisor publishes $600 to $1,350 for many glass jobs. This Old House walk-in samples put a door line near $1,600 in one composite. Glass type and opening width move the bid. We quote the opening.
Ready for a shower conversion estimate in Meridian?
Tub out, shower in. Tile or acrylic. Free estimate, no obligation.